Care Instructions

Your MNDFRME tee is printed on Gildan 5000 heavyweight cotton — a fabric that gets better with wear and lasts with proper care. Follow these instructions to keep the print sharp and the fit stable.

Washing

• Machine wash cold — cold water prevents shrinkage and colour fading
• Wash inside out — protects the print from friction in the drum
• Gentle cycle preferred — reduces stress on the print and fabric
• Do not bleach — bleach degrades cotton fibres and damages prints
• Avoid fabric softeners on the print area — can cause peeling over time

Drying

• Tumble dry on low heat — high heat causes shrinkage and degrades the print
• Remove promptly when dry — prevents wrinkles and print creasing
• Air dry as an alternative — the gentlest option; dry flat or on a hanger

Ironing

• Do not iron directly on the print — iron inside out or place a cloth between the iron and the graphic
• Low to medium heat only — high heat will damage or crack the print

Storage

• Store folded or hung — both are fine for this fabric weight
• Keep out of direct sunlight for extended periods — preserves colour

First Wash

Wash your tee before wearing it for the first time. This removes any residual manufacturing agents and softens the fabric. Always wash inside out from the first wash.

Questions? Email hello@mndfrme.com.